Inventory Unit Detail
2019 Exmark Lazer Z X 60 in
$7,900.00
Key Features
New/Used Used
Usage1290 Hours
Availability
In Stock
LocationCrawford's Equipment
Stock #
8627
Condition
Good
Product Features
Dealer Notes
EXMARK 60 in LAZER Z X Zero Turn Mower : 35 HP EFI , Red Tech , Foot Controlled Discharge Gate
SPECS :
Power Components
Engine Brand: Kohler®
Engine Model: ECV940
Engine Displacement: 999
Engine Series: Command™ EFI
Engine Speed: 3,650 RPM
Air Filter: Heavy-duty canister air filtration system
Fuel Type: Gas EFI
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator: Yes - electronic Sender
Drive: Hydro-Drive
Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed: Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release: Allows unit movement without engine running.
Casters: .50" thick caster yoke arms.
Model Description: Lazer Z X-Series 35 HP* Koh EFI EGov ECV940 w/60" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum
Decks
Width / Cutting Deck: 60"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades: 3 Blades at 20.50" Length
Dimensions
Width: 72.8 in. (184.9 cm)
Length: 86.1 in. (218.7 cm)
Height: 70 in. (177.8 cm)
SPECS :
Power Components
Engine Brand: Kohler®
Engine Model: ECV940
Engine Displacement: 999
Engine Series: Command™ EFI
Engine Speed: 3,650 RPM
Air Filter: Heavy-duty canister air filtration system
Fuel Type: Gas EFI
Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
Fuel Indicator: Yes - electronic Sender
Drive: Hydro-Drive
Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Speed: Infinitely variable speed selection from 0-11.5 mph (18.5 kmph) forward, 0-6.0 mph (11.3 kmph) reverse
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release: Allows unit movement without engine running.
Casters: .50" thick caster yoke arms.
Model Description: Lazer Z X-Series 35 HP* Koh EFI EGov ECV940 w/60" UltraCut Series 6 Deck, RED, Susp Seat & Wide Semi-Pneum
Decks
Width / Cutting Deck: 60"
Deck Style: Floating Deck
Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades: 3 Blades at 20.50" Length
Dimensions
Width: 72.8 in. (184.9 cm)
Length: 86.1 in. (218.7 cm)
Height: 70 in. (177.8 cm)
