Bobcat T590 Compact Track Loader : 66 HP , Cab No HT , 2 SPD , Power Bob-Tach , Hand - Foot Controls , Attachment Control , Wide Tracks . The Bobcat® T590 Compact Track Loader is designed to bring you high performance in a compact and stable package. Its low ground pressure allows you to work in rough conditions or where you need to minimize ground disturbance - while still providing heavy load-carrying capacity and strong traction. It's your perfect solution, the first machine on site and the last to leave!


SPECS:

Engine Model Kubota V2607-DI-TE3B
Engine Type Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders Four
Displacement, cu.in (L) 158.7 (2.59)
Cylinder Bore, in (mm) 3.43 (87.0)
Piston Stroke, in (mm) 4.33 (110.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 61.0 (45.5)
Rated Engine Speed, rpm 2700
Maximum Torque, Nm (lb-ft) 211 (155.6)
Torque Speed, rpm 1425
Idle Speed, rpm 1175-2900
Compression Ratio 19:1
Fuel System Direct injection
Lubricating System Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) 36.5 (138.2)
Oil Capacity, qts (L) 9.7 (10.3)
Coolant Capacity, qts (L) 12.1 (11.4)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 90
DRIVE TRIAN
Drive System Type Fully hydrostatic, rubber track drive
Transmission Tandem piston pumps and reversing motors
Number of Gears (Std) Single
Number of Gears (Opt) Two (low/high)
Brakes Type Independent wet disc
Drive Motor Oil Capacity, qts (L) 0.39 (0.37)
Maximum Speed (Std), mph (kph) 7.1 (11.4)
Maximum Speed (Opt), mph (kph) 10.4 (16.7)
UNDERCARRIAGE
Tracks Type Rubber with steel inserts
Tracks Tension Grease cylinder and spring
Track Width (Std), in (mm) 12.6 (320)
Track Width (Opt), in (mm) 15.8 (400)
Ground Pressure (Roller Undercarriage), Bar (psi) 0.35 (5.1)
Ground Pressure (Solid-Mounted Undercarriage), Bar (psi) 0.34 (5.0)
HYDRAULIC PERFORMANCE
Hydraulic System Type Open center
Hydraulic Pump Type Gear
Pump Flow (Std), gpm (Lpm) 17.1 (64.7)
Pump Flow (Opt), gpm (Lpm) 26.7 (101.1)
System Pressure, Bar (psi) 238-245 (3450-3550)
Hydraulic Reservoir Capacity, qts (L) 8.1 (7.6)
Hydraulic System Capacity, gal (L) 9.5 (36.0)
Number of Valves 3
LOADER PERFORMANCE
Rated Operating Capacity (Roller Undercarriage), lbs (kg) 2110 (955)
Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) 2185 (990)
Tipping Load (Roller Undercarriage), lbs (kg) 6025 (2730)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) 6250 (2835)
Boom Lifting Force (Roller Undercarriage), lbs (kg) 4755 (2155)
Boom Lifting Force (Solid-Mounted Undercarriage), lbs (kg) 4555 (2065)
Bucket Breakout Force (Roller Undercarriage), lbs (kg) 4490 (2035)
Bucket Breakout Force (Solid-Mounted Undercarriage), lbs (kg) 4710 (2135)
DIMENSIONS and WEIGHT
Length (w/o Bucket), in (mm) 104.6 (2655)
Length (Bucket On Ground), in (mm) 133 (3375)
Length (Ground Contact), in (mm) 54.1 (1375)
Width (w/o Bucket), in (mm) 67 (1700)
Operating Height, in (mm) 153.6 (3900)
Height (Operator Cab), in (mm) 77.8 (1970)
Height to Hinge Pin (Fully Raised), in (mm) 119 (3020)
Dump Angle At Max Height, deg 42
Dump Height (Fully Raised), in (mm) 91.3 (2320)
Dump Reach At Max Height, in (mm) 34.9 (885)
Rollback Angle At Ground Level, deg 30
Rollback Angle At Max Height, deg 97
Departure Angle, deg 28
Bucket Width, in (mm) 68 (1725)
Ground Clearance, in (mm) 7.4 (190)
Turning Radius (w/Bucket), in (mm) 80 (2030)
Operating Weight (Roller Undercarriage), lbs (kg) 7895 (3580)
Operating Weight (Solid-Mounted Undercarriage), lbs (kg) 7745 (3515)