Bobcat S185 Skid Steer : 61 HP ,Cab HT , Hand -Foot Controls .



SPECS :

Engine Model Kubota V2607-DI-TE-3B
Engine Type Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders Four
Displacement, cu.in (L) 158.7 (2.59)
Cylinder Bore, in (mm) 3.43 (87.0)
Piston Stroke, in (mm) 4.33 (110.0)
Aspiration Turbocharged
Rated Engine Power, hp (kW) 61.0 (45.2)
Rated Engine Speed, rpm 2700
Maximum Torque, Nm (lb-ft) 194 (144)
Torque Speed, rpm 1425
Idle Speed, rpm 1175-2900
Compression Ratio 19:1
Fuel System Direct injection
Lubricating System Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) 24.0 (90.8)
Oil Capacity, qts (L) 10.3 (9.7)
Coolant Capacity, qts (L) 14.5 (13.7)
Electrical System Rating, Volts 12
Charging System Alternator
Alternator Rating, Amps 90
Drive Train
Drive System Type Hydrostatic transmission, 4-wheel drive
Number of Gears (Std) Single
Number of Gears (Opt) Two (low-high)
Drive Pump Type Tandem, hydrostatic piston
Chain Drive Type 80 HSOC continuous roller chain
Brakes Type Independent wet disc
Tire Size (Std) 10x16.5
Tire Size (Opt) 31-12x16.5
Chaincase Capacity, qts (L) 32.1 (30.3)
Travel Speed (Single), mph (km/h) 7.3 (11.8)
Travel Speed (Low Range), mph (km/h) 7.5 (12.1)
Travel Speed (High Range), mph (km/h) 11.1 (17.9)

Hydraulic System
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 16.9 (64.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 26.4 (100.0)
System Pressure, Bar (psi) ...................... 231 (3350)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.5 (38.1)
Lift Cylinder Piston Diameter, in (mm) ...................... 2.5 (63.5)
Lift Cylinder Piston Stroke, in (mm) ...................... 23.7 (601)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.37 (34.9)
Bucket Cylinder Piston Diameter, in (mm) ...................... 2.75 (69.8)
Bucket Cylinder Piston Stroke, in (mm) ...................... 13.2 (335)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.8 (18.2)
Hydraulic System Capacity, gal (L) ...................... 9.0 (34.1)

Loader Performance
Rated Operating Capacity, lbs (kg) ...................... 1850 (840)
Tipping Load, lbs (kg) ...................... 3900 (1770)
Boom Lifting Force, lbs (kg) ...................... 3495 (1588)
Bucket Breakout Force, lbs (kg) ...................... 3420 (1554)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight
Wheelbase, in (mm) ...................... 40.5 (1030)
Height (Operator Cab), in (mm) ...................... 76.3 (1940)
Height (Boom Raised), in (mm) ...................... 152.1 (3860)
Length (w/o Bucket), in (mm) ...................... 101.9 (2590)
Length (Bucket On Ground), in (mm) ...................... 130.3 (3310)
Width (w/o Bucket), in (mm) ...................... 66 (1675)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 118.2 (3000)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91 (2310)
Dump Reach At Max Height, in (mm) ...................... 29.6 (755)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (w/Bucket), in (mm) ...................... 78.8 (2000)
Shipping Weight, lbs (kg) ...................... 5660 (2570)
Operating Weight, lbs (kg) ...................... 6220 (2820)